1. Ordinary punching machine with a "reciprocating" feeding mechanism; 2. Reciprocating length and width 780mm × 800mm; 3. Reciprocating mechanism motion accuracy 0.05mm; 4. Basic punching speed 120 times/minute, punching speed increased to 160/minute as much as possible;

The HN-800-Ⅲ CNC punching machine uses X-axis and Y-axis digital control. The X-axis stroke is 200mm, and the Y-axis stroke is 780mm. ① The inner frame space of the punching machine is 1100mm, and the waste chip slot is 80mm. ② The punching range is 780×800mm sheet.

Molds and consumables: Punch needles consist of a hanging needle plate, guide plate, template, and punch needle. Needles: Service life is approximately 6-8 years. Punch needles and templates: Under normal use, approximately 1.2 million punches, with 3-4 possible re-sharpenings during this period.

Molds and consumables: Punch needles consist of a hanging needle plate, guide plate, template, and punch needle. Needles: Service life is approximately 6-8 years. Punch needles and templates: Under normal use, approximately 1.2 million punches, with 3-4 possible re-sharpenings during this period.